DP-P Series MULTIFUNCTIONAL LABORATORY POWER SUPPLIES

Maximal values of the series: 600V / 300A / 6kW / ØPL = 0,78€/W

Voltage:0 … 600VSetting Accuracy U:≤0.2% ± 2 LSB
Current:0 … 300ASetting Accuracy I:≤0.5% ± 2 LSB
Power:0 … 6kWExt. Control Analog:Nein
Cabinet:19″Ext. Feedback Analog:No
Regulation:U / IRS232:Yes
Load Regulation U:≤0.1% + 2 LSBRS485:Yes
Load Regulation I:≤0.2% + 2 LSBRS422:Yes
Line Regulation U:≤0.1% + 2 LSBOpen Protocol:Yes
Line Regulation I:≤0.1% + 2 LSBModbus-RTU:No
Noise U:≤50mV … ≤200mVSCPI:No
Noise I:≤50mA … ≤200mAReverse Current Protection:No
Recovery Time (50% Chg.):Polarity Switch:No
Display Accuracy U:≤0.2% ± 2 LSBInterlock:No
Display Accuracy I:≤0.5% ± 2 LSBExt. Output On/Off Ctrl.:No
Voltage:0 … 600V
Current:0 … 300A
Power:0 … 6kW
Cabinet:19″
Regulation:U / I
Load Regulation U:≤0.1% + 2 LSB
Load Regulation I:≤0.2% + 2 LSB
Line Regulation U:≤0.1% + 2 LSB
Line Regulation I:≤0.1% + 2 LSB
Noise U:≤50mV … ≤200mV
Noise I:≤50mA … ≤200mA
Recovery Time (50% Chg.):
Display Accuracy U:≤0.2% ± 2 LSB
Display Accuracy I:≤0.5% ± 2 LSB
Setting Accuracy U:≤0.2% ± 2 LSB
Setting Accuracy I:≤0.5% ± 2 LSB
Ext. Control Analog:No
Ext. Feedback Analog:No
RS232:Yes
RS485:Yes
RS422:Yes
Open Protocol:Yes
Modbus-RTU:No
SCPI:No
Reverse Current Protection:No
Polarity Switch:No
Interlock:No
Ext. Output On/Off Ctrl.:No

* Optional

During the development of DP-P series laboratory power supplies special emphasis has been placed on versatility. In addition to the usual basic functions of a DC laboratory power supply such as precisely adjustable voltage and current values, overvoltage and overcurrent protection as well as automatic switching between the CC (constant current) and CV (constant power) modes, the DP-P series power supply can be connected via modern digital interfaces RS232, RS485 ,RS422 and an open protocol to set and record output values. Modern ARM microprocessor-based digital control provides fast response times and constant monitoring of output values, resulting in high stability and accuracy.

Laboratory power supply configurator

Select a voltage, current, power combination from the model list by clicking on the corresponding line. Then configure the model with additional options, the configuration is displayed at the bottom of the screen in the configurator. Press “CONFIRM” to end the configuration and to proceed with the request. Fill out the required fields and send your request to our support team by pressing the “REQUEST” button, you will receive an offer by e-mail within a few minutes.

ModelVoltageCurrentPowerPricePrice / Performance
DP12-2HP12 V200 A2400 W1.920,00 €0,80 €/W
– No options available
DP20-120P20 V120 A2400 W1.920,00 €0,80 €/W
DP30-80P30 V80 A2400 W1.880,00 €0,78 €/W
DP40-60P40 V60 A2400 W1.880,00 €0,78 €/W
DP60-40P60 V40 A2400 W1.880,00 €0,78 €/W
DP1H-24P100 V24 A2400 W1.880,00 €0,78 €/W
DP150-16P150 V16 A2400 W1.860,00 €0,77 €/W
DP2H-12P200 V12 A2400 W1.860,00 €0,77 €/W
DP3H-8P300 V8 A2400 W1.850,00 €0,77 €/W
DP4H-6P400 V6 A2400 W1.850,00 €0,77 €/W
DP5H-4-8P500 V4.8 A2400 W1.850,00 €0,77 €/W
DP6H-4P600 V4 A2400 W1.850,00 €0,77 €/W

Model[Accessories] and [Options]Price plus Vat and Shipping
Model[]PreisCONFIRM
GerätemodellPrice plus Vat and Shipping
ModelPriceCONFIRM
[]
REQUESTBACK