0 – 1.000V / 0 – 10A / 10.000W DP-D Series High-Performance Laboratory Power Supply DP10H-10D

The DP10H-10D constant voltage source / constant current source of the DP-D series achieves a very high price-performance ratio due to its unsurpassed configurability. These high-performance laboratory power supplies can be expanded with common digital connectivity options such as RS485, RS232, or USB and many other additional options to perfectly match the requirements. Developed for industrial use, these laboratory power supplies are particularly maintenance-free and reliable even in continuous operation at full load. In the basic version, devices of the DP-D series offer the operating modes CV (constant voltage) and CC (constant current) with automatic switching and high-resolution voltage and current displays. All parameters can be easily set via the front panel or via one of the optional digital or analogue connections. Automatic protection functions integrated into these high-performance laboratory power supplies enable the safe operation in all conditions. The output is short-circuit proof, potential-free and optionally protected against reverse currents. Configure your device with more than 14 available options, also custom solutions are possible on request.

Technical specifications for the DP10H-10D laboratory power supply in basic equipment

– 1 x Adjustable DC output 0 – 1.000 V / 0 – 10 A / max. 10.000 Watt connection on the rear side with screw terminals
– Low ripple [U ≤500V] ≤0.5% (RMS) / [U >500V] ≤0.3% + 10mVrms (RMS) / [U >1000V] ≤0.3% (RMS)
– Galvanic isolated, non-grounded and short-circuit proof outputs
– Well-readable digital displays (Voltage/Current) with actual and nominal output values
– High-quality components and a proven design

General Options

Your company as our reference (-20,00 )

Selected: You allow us to name your company as our reference in our "references" section, and get 20,00 € discount!

Functionality

19 Inch rack-mount version (+0,00 )

Selected: The power supply is manufactured as a 19 inch rack-mount device without rubber feet and with metal handles on the front side.

CP- Constant power mode (+0,00 )

Selected: In addition to CV (constant voltage mode) and CC (constant current mode), the device will support an automatic power limitation CP (constant power mode).

Polarity switch (commutator) (+0,00 )

Selected: Allows you to change the output polarity during operation over the front panel or digital connection (if selected). NOTE: Option changes the size and weight of the unit.

Timer (Output On/Off) (+0,00 )

Selected: The on/off timer can be set over the frontpanel to configure output on/off cycles. This allows the configuration of square wave signals.

Reverse current protection (+0,00 )

Selected: Protection against reverse currents when powering large inductive loads. If active, the output of the power supply becomes low resistive to the load. NOTE: Option changes the size and weight of the device.Selected: Protection against reverse currents when powering large capacitive loads. If active, the output of the power supply becomes high resistive to the load.

Connections

External output On/Off switching (+0,00 )

Selected: The device will be equipped with an external input for switching the output on or off. Signal level: 5V = On, 0V = OffSelected: The device will be equipped with an external input for switching the output on or off. Signal level: 12V = On, 0V = OffSelected: The device will be equipped with an external input for switching the output on or off. Signal level: 24V = On, 0V = OffSelected: When the 5V loop is closed, the output of the device is switched on.

Interconnect-Bus (+0,00 )

Selected: The device will be equipped with an Interconnect-Bus. Up to 12 devices of the same type can work together in a serial or parallel network.

Remote-Sensing Connection (+0,00 )

Selected: A remote-sensing connection to compensate for line losses at the load.

Digital connection (+0,00 )

Selected: The device will be equipped with a RS232 connection on the rear side. Reading and writing output values over an open protocol possible.Selected: The device will be equipped with a RS232 connection on the rear side and will be shipped with a USB/RS232 adapter. Reading and writing of output values over an open protocol possible.Selected: The device will be equipped with a RS485 connection on the rear side. Reading and writing output values over an open protocol possible.Selected: The device will be equipped with a CAN-Bus connection on the rear side. Reading and writing output values over an open protocol possible.

Analog connection f. output Voltage control (+0,00 )

Selected: A 0 - 5V control input will be available on the rear side to control the output Voltage.Selected: A 0 - 10V control input will be available on the rear side to control the output Voltage.Selected: A 4 - 20mA control input will be available on the rear side to control the output Voltage.

Analog connection f. output Current control (+0,00 )

Selected: A 0 - 5V control input will be available on the rear side to control the output Current.Selected: A 0 - 10V control input will be available on the rear side to control the output Current.Selected: A 4 - 20mA control input will be available on the rear side to control the output Current.

Analog connection f. output Power control (+0,00 )

Selected: A 0 - 5V control input will be available at the rear side to control the power limiting setting. CAUTION: The option "CP-Mode" has to be selected !Selected: A 0 - 10V control input will be available at the rear side to control the power limiting setting. CAUTION: The option "CP-Mode" has to be selected !Selected: A 4 - 20mA control input will be available at the rear side to control the power limiting setting. CAUTION: The option "CP-Mode" has to be selected !

Analog connection f. output Voltage feedback (+0,00 )

Selected: A 0 - 5V output Voltage feedback connection will be available at the rear side.Selected: A 0 - 10V output Voltage feedback connection will be available at the rear side.Selected: A 4 - 20mA output Voltage feedback connection will be available at the rear side.

Analog connection f. output Current feedback (+0,00 )

Selected: A 0 - 5V output Current feedback connection will be available at the rear side.Selected: A 0 - 10V output Current feedback connection will be available at the rear side.Selected: A 4 - 20mA output Current feedback connection will be available at the rear side.

Analog connection f. output Power feedback (+0,00 )

Selected: A 0 - 5V output Power feedback connection will be available at the rear side.Selected: A 0 - 10V output Power feedback connection will be available at the rear side.Selected: A 4 - 20mA output Power feedback connection will be available at the rear side.

3.990,00  excl. tax.

Est. delivery: 14.01.2018
SKU: DP10H-10D