0 – 520V 3 Ph. / 28A (0-150V) / 14A (0-300V) / 10.000VA / DF-C Series True Sine AC Laboratory Power Supply DF-C6310

The ARM microcontroller controlled alternating current power supply DF-C 6310 of the DF-C series with an output power of 10.000 VA offers a variable true-sine output with precisely adjustable phase voltage, frequency (45Hz – 65Hz) and live display of the output values ​​(voltage, power, current, frequency and power factor). This powerful AC laboratory power supply has been developed for laboratory and industrial use and can be operated continuously without maintenance even under maximum load. Optionally, the DF-C series AC power supply can be equipped with digital and analog inputs and outputs, the advanced ARM control provides very stable output values ​​and fast response times. This AC laboratory power supply offers the operating mode CV (constant voltage) and easy-to-read high-resolution voltage and current displays. All parameters can be easily set via the front panel or via the optional analog or digital connections. Automatic protection functions integrated in the AC laboratory power supply allow safe operation in all conditions, the output is short-circuit proof and optionally potential-free.

Technical specifications for the DF-C 6310 in basic equipment

– 1 Phase True-Sine output on the front side with screw terminals and automatic overcurrent circuit breakers
– Adjustable Voltage U: 0 – 300V 1 Ph. / 0 – 520V 3 Ph.
– Automatically adjusted Current I (per Phase): 0 – 28A (0-150V) / 0 – 14A (0-300V)
– Maximum output power: 10.000VA
– Adjustable Frequency f: 45Hz – 65Hz
– Potential-free and short-circuit proof outputs (depending on the configuration, check “polarity and potential” in options)
– Actual and nominal values (Voltage, Power, Current, Frequency and Power Factor)

4.550,00  excl. tax.

Est. delivery: 22.10.2018

Functionality

+ Extended output frequency 45Hz - 65Hz, 100Hz, 200Hz, 400Hz (+0,00 )

Selected: The power supply will be equipped with the option to select the output frequency between 45Hz - 65Hz, 100Hz, 200Hz, 400Hz.

ATTENTION: At 400Hz only permanently loadable below 40% output capacity, see duty-cycle diagram below.
If longer operation times at higher loads are required, please select a higher capacity model of the same series.

DF-C Series 400Hz Load / Operation Time Diagram

Connections

+ External output On/Off switching (+0,00 )

Selected: The device will be equipped with an external input for switching the output on or off. Signal level: 5V = On, 0V = OffSelected: The device will be equipped with an external input for switching the output on or off. Signal level: 12V = On, 0V = OffSelected: The device will be equipped with an external input for switching the output on or off. Signal level: 24V = On, 0V = OffSelected: When the 5V loop is closed, the output of the device is switched on.

+ Digital connection (+0,00 )

Selected: The device will be equipped with a RS232 connection on the rear side. Reading and writing output values over an open protocol possible.Selected: The device will be equipped with a RS485 connection on the rear side. Reading and writing output values over an open protocol possible.Selected: The device will be equipped with a RS232 connection on the rear side and will be shipped with a USB/RS232 adapter. Reading and writing of output values over an open protocol possible.Selected: The device will be equipped with a RS232 connection on the rear side and will be shipped with a RS232/CAN Bus adapter. Reading and writing of output values over an open protocol possible.

+ Analog connection f. output Voltage control (+0,00 )

Selected: A 0 - 5V control input will be available on the rear side to control the output Voltage.Selected: A 0 - 10V control input will be available on the rear side to control the output Voltage.Selected: A 4 - 20mA control input will be available on the rear side to control the output Voltage.

+ Analog connection f. output Voltage feedback (+0,00 )

Selected: A 0 - 5V output Voltage feedback connection will be available at the rear side.Selected: A 0 - 10V output Voltage feedback connection will be available at the rear side.

+ Analog connection f. output Current feedback (+0,00 )

Selected: A 0 - 5V output Current feedback connection will be available at the rear side.Selected: A 0 - 10V output Current feedback connection will be available at the rear side.

Output Configuration

+ Polarity and potential (+0,00 )

Selected: Grounded output.Selected: Potential-free output. CAUTION: Please note that the output has no potential to PE, thus some protection devices may be ineffective.

Accessories

+ AC Power Plug (+0,00 )

Selected: The device is supplied with a screw terminal block for connection to the power grid.Gewählt: The power supply will be delivered with 1m cable and CEE Blue 32A P+N+E 6h / CEE Red 32A L1+L2+L3+N+E Plug for connection to the power grid.
ATTENTION: Only for power supplies under/equal 21.000W output power.
Gewählt: The power supply will be delivered with 2m cable and CEE Blue 32A P+N+E 6h / CEE Red 32A L1+L2+L3+N+E Plug for connection to the power grid.
ATTENTION: Only for power supplies under/equal 21.000W output power.
Gewählt: The power supply will be delivered with 1m cable and Schuko® two-pin grounded plug for connection to the power grid.
ATTENTION: Only for power supplies under/equal 3.200W output power.
SKU: DF-C6310 Categories: ,