|DP12-2HP||1.920,00 €||0 – 12 V||0 – 200 A||2.400 Watt|
|DP20-120P||1.920,00 €||0 – 20 V||0 – 120 A||2.400 Watt|
|DP30-80P||1.880,00 €||0 – 30 V||0 – 80 A||2.400 Watt|
|DP40-60P||1.880,00 €||0 – 40 V||0 – 60 A||2.400 Watt|
|DP60-40P||1.880,00 €||0 – 60 V||0 – 40 A||2.400 Watt|
|DP1H-24P||1.880,00 €||0 – 100 V||0 – 24 A||2.400 Watt|
|DP150-16P||1.860,00 €||0 – 150 V||0 – 16 A||2.400 Watt|
|DP2H-12P||1.860,00 €||0 – 200 V||0 – 12 A||2.400 Watt|
|DP3H-8P||1.850,00 €||0 – 300 V||0 – 8 A||2.400 Watt|
|DP4H-6P||1.850,00 €||0 – 400 V||0 – 6 A||2.400 Watt|
|DP5H-4-8P||1.850,00 €||0 – 500 V||0 – 4,8 A||2.400 Watt|
|DP6H-4P||1.850,00 €||0 – 600 V||0 – 4 A||2.400 Watt|
Advanced Multifunctional Power Supplies up to 2400W: The DP-P Series
The DP-P Series constant voltage / constant current sources offer a very high grade of integration and reliability. Coming with all widely used digital connection possibilities as RS485, RS422, RS232 open protocol and ModBus support these advanced multifunctional power supplies can be integrated into any persisting or new infrastructure. All devices offer CV (constant voltage) and CC (constant current) operation modes with automatic switching and high resolution voltage and current meters. All parameters can be easily adjusted either over the front panel, or through one of the digital connections. Integrated automatic protections as the over voltage protection (OVP), over current protection (OCP), over load protection (OLP), under voltage protection (UVP) and over temperature protection (OTP) allow safe operation of these devices in any conditions plus the output is short-circuit proof and potential-free.
Our advanced multifunctional power supplies DP-P are available as a 2U 19inch tabletop or rack-mount device in two power versions 1200W and 2400W, voltages up to 600V and currents up to 200A. Also a high voltage version up to 12kV is available as the DP-PH series.
Quick overview of the DP-P Series Multifunctional Power Supplies
|Max. Power||Up to 2400 Watt|
|Max. Voltage||Up to 600V|
|Max. Current||Up to 200A|
|Galvanic Isolation||Output potential-free on all models / Signal In- & Outputs potential-free on all models|
|Working Modes||CV – Constant Voltage / CC – Constant Current|
|Connections||RS232 / RS484 / RS422|
|Features||19″ Rack-mount or Stand-alone form-factor|
Select a model from the list
The list below shows avalable models of the DP-P Series advanced multifunctional power supplies. By clicking on the model name, you are redirected to the product page with a detailed description, data sheets, documents and configuration options. If you do not find the configuration that suits you, please contact us and we will provide you with an offer.
Unable to find a suitable model ?
Please check the other power supply series or send us a request.