DP-PH Series HIGH-VOLTAGE POWER SUPPLIES
Maximum values of the series: 12kV / 5A / 5kW / ØPL = 2.12€/W
| Voltage range: | 0 ... 12kV |
| Current range: | 0 ... 5A |
| Power range: | 0 ... 5000W |
| Cabinet: | 19″ 2U 1/2 Breite (600W)* 19″ 2U (P < 4KW) 19″ 3U (P ≥ 4KW) |
| Regulation: | U / I |
| Load regulation U: | ≤0.5% + 2 LSB |
| Load regulation I: | ≤0.5% + 2 LSB |
| Mains regulation U: | ≤0.1% + 2 LSB |
| Line regulation I: | ≤0.1% + 2 LSB |
| Noise U: | ≤0.05%FS |
| Noise I: | ≤0.05%FS |
| Recovery Time (50% change): | |
| Display accuracy U: | ≤0.2% + 2 LSB |
| Display accuracy I: | ≤0.5% + 2 LSB |
| Setting accuracy U: | ≤0.2% + 2 LSB |
| Setting accuracy I: | ≤0.5% + 2 LSB |
| Ext. control analogue: | No |
| Ext. feedback analogue: | No |
| RS232: | Yes |
| RS485: | Yes |
| RS422: | Yes |
| Open protocol: | Yes |
| Modbus RTU: | Yes |
| SCPI: | No |
| Reverse current protection: | No |
| Polarity changer: | No |
| Interlock: | No |
| Ext. output On/Off Ctrl. | No |
* Optional
During the development of DP-PH series high-voltage power supplies, special emphasis was placed on versatility, high performance, precision and stability. In addition to the usual basic functions of such units, such as precisely adjustable voltage and current values, overvoltage and overcurrent protection, and automatic switching between CC (constant current/current source) and CV (constant voltage/voltage source) modes, the DP-PH series can be controlled via modern digital interfaces RS232, RS485, RS422 to set and record output values. The ARM architecture-based digital control loop provides fast response times and constant monitoring of output values, resulting in high stability and accuracy. Supporting the Modbus RTU protocol, the high-voltage laboratory power supply can be easily integrated into a new or existing infrastructure and interact with Labview, while it can also be operated completely independently via front panel controls.
Brief summary of the advantages of DP-PH series high-voltage power supply units:
| Connectivity | Digital via RS485, RS422, RS232 with full support for Modbus RTU. Analogue remote control of output status (on/off) possible via 5V signal. Status output 5V for transmission of device status. |
| Features | Output values 0 ... 100% variably adjustable, operating modes constant voltage and constant current with automatic switching depending on the load. Remote measurement input for compensation of line losses up to 2V. |
| Output configuration | Output floating, short-circuit-proof, can be operated constantly in short-circuit mode. Two units can be operated as a bipolar voltage source in a network. |
| Security | Automatic shutdown in case of overheating, overvoltage, overcurrent with error display. Front panel can be deactivated or locked, |
| Upgrade options | Partially compatible with AP series expansion modules. |
*Optional
Format and performance
High-voltage laboratory power supplies of the DP-PH series in various versions
Image shows DP-PH series high voltage power supplies, please refer to the data sheet for the size of the selected model.
High-quality components and a lot of experience in the development of laboratory and industrial power supplies enable compact dimensions as well as high power and voltage. Smart cooling regulates the speed depending on the set output parameters and temperature, so that the high-voltage power supply only reacts by increasing the speed when it is really needed. Up to 1.2kW of power is supplied by DP-PH series high-voltage laboratory power supplies from a 19″ 2U 1/2 width cabinet, which allows mounting of two units side by side in a 3U rack (with adapter). In addition, laboratory power supplies of the DP-PH series can be used in all cabinet sizes both rack-mounted and free-standing – the suitable mounting accessories for rack mounting are supplied free of charge with all units in 2U and 3U design. Suitable mounting accessories for two 19″ 2U 1/2 units in one rack can be ordered separately.
| Less than and including 600W and 3kV | 19″ 2U 1/2 width cabinet |
| Greater than 600W or 3kV and up to 2.4kW | 19″ 2U cabinet |
| Greater than 2.4kW | 19″ 3U cabinet |
Attention: Enclosure size may vary for certain models, please refer to the data sheet.
Full control
DP-PH Series High-voltage laboratory power supplies Software Suite
Image shows a screenshot from the software suite for DP-P and DP-PH series laboratory power supplies.
Because the development of high-voltage power supplies of the DP-PH series focused on laboratory applications with high demands on precision and automation, laboratory power supplies of this series are supplied with a comprehensive software suite for Window 10 & 11 that leaves almost nothing to be desired. Whether simple setting and monitoring of output values or programming of repetitive complex voltage/current curves – everything can be done quickly and easily. The power supply unit can be connected via RS485, RS232 or RS422, and communication via Modbus RTU guarantees low latencies and reliable data transmission.
Compatible with many external expansion modules of the AP series
Expand your DP-PH series high-voltage power supply unit with additional functions – even after purchase.
Image shows a DP-M series high-performance power supply unit in 2U cabinet with AP8 module (top).
High-voltage laboratory power supplies of the DP-PH series are compatible with many optional expansion modules of the AP series, so you are no longer bound to the configuration you selected when ordering, but you can also expand certain functions at a later date via external modules. In addition, the AP series is constantly being expanded and upgraded with new modules, so that you can also expand existing units in the future with new functions that we will introduce.
Currently, the following AP series expansion modules are compatible with DP-PH series laboratory power supplies:
Model AP9: Combined reverse current protection (inductive and capacitive loads)
Depending on the maximum voltage and current, the module is manufactured in 19″ 1U 1/2, 2U or 3U construction and protects your power supply unit from reverse currents, which can occur when operating with large capacitive or inductive loads. This means that you do not need an additional protective circuit between the power supply unit and your load, which reduces complexity enormously.
Model AP8: Additional EMC filter with capacitance on the output side
Some loads require a cleaner voltage than the power supply can deliver in the basic configuration, or the inverse, generate very strong interferences (e.g. by high-frequency current draw with very steep edges - square wave). This can influence the control of the power supply at high currents. For these cases we have developed the AP8 module which combines a three-stage EMC filter with a large fast capacitance to further stabilise the output voltage of the power supply in critical applications on the one hand and to protect the power supply from the influence of loads on the other. This combination guarantees a stable output voltage even under the highest load from complex high-frequency loads.
Connection options
High-Voltage Laboratory Power Supply of the DP-PH Series
Image shows a DP-PH series high voltage power supply unit in 2U (model with non-floating output), please refer to the data sheet for the size of the selected model.
Equipped as standard with RS232, RS422 and RS485 with full Modbus RTU support, DP-PH series high-voltage power supplies can be quickly and effectively integrated into your existing infrastructure. A remote-sensing input, analogue status output (error/normal) and control input for output control (on/off) are also available as standard.
Digital interfaces RS232, RS422 & RS485 (standard)
Equipped with RS232, RS422 and RS485 connections as standard, with full support for the Modbus RTU protocol, laboratory power supplies of the DP-PH series facilitates both integration into existing infrastructures and the development of a new one. The open Modbus RTU protocol allows customised control solutions to be implemented quickly and effectively, so that nothing stands in the way of automation.
Remote-sensing input (standard)
The remote-sensing input is installed as standard in all high-voltage laboratory power supplies of the DP-PH series and allows line losses between the power supply unit and the load to be compensated. The power supply unit can compensate for losses of up to 2V by measuring the voltage at the load and automatically counteracting it. This function is especially useful for particularly long cables with small diameters. Furthermore, the remote-sensing input is necessary for connecting modules of the AP series.
Analogue remote control of the output status (standard)
Analogue input for remote control of the output status of the laboratory power supply unit (on/off) via floating 5V signal.
Analogue status output (standard)
The analogue status output enables the function of the laboratory power supply unit to be monitored via a 2-pin line with two states: 0V error / 5V function
| Model | Price | Output voltage | Output current | Power | Display resolution U | Display resolution I | Residual ripple U | Residual ripple I | Load regulation U | Load regulation I | Line regulation U | Line regulation I | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| DP12H-05PH | 1.990,00 € | 0 ... 1.2kV | 0 ... 0.5A | 0 ... 600W | 1V | 0.1mA | ≤0.05%FS | ≤0.05%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP12H-1PH | 2.450,00 € | 0 ... 1.2kV | 0 ... 1A | 0 ... 1.2kW | 1V | 1mA | ≤0.05%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP12H-2-5PH | 3.100,00 € | 0 ... 1.2kV | 0 ... 2.5A | 0 ... 3kW | 1V | 1mA | ≤0.05%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP12H-2PH | 2.870,00 € | 0 ... 1.2kV | 0 ... 2A | 0 ... 2.4kW | 1V | 1mA | ≤0.05%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP12H-3-33PH | 3.480,00 € | 0 ... 1.2kV | 0 ... 3.33A | 0 ... 4kW | 1V | 1mA | ≤0.05%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP15H-04PH | 1.990,00 € | 0 ... 1.5kV | 0 ... 0.4A | 0 ... 600W | 1V | 0.1mA | ≤0.05%FS | ≤0.05%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP15H-08PH | 2.450,00 € | 0 ... 1.5kV | 0 ... 0.8A | 0 ... 1.2kW | 1V | 0.1mA | ≤0.05%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP15H-1-6PH | 2.870,00 € | 0 ... 1.5kV | 0 ... 1.6A | 0 ... 2.4kW | 1V | 1mA | ≤0.05%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP15H-2-6PH | 3.520,00 € | 0 ... 1.5kV | 0 ... 2.6A | 0 ... 4kW | 1V | 1mA | ≤0.05%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP15H-2PH | 3.090,00 € | 0 ... 1.5kV | 0 ... 2A | 0 ... 3kW | 1V | 1mA | ≤0.05%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP15H-3-3PH | 3.910,00 € | 0 ... 1.5kV | 0 ... 3.3A | 0 ... 5kW | 1V | 1mA | ≤0.05%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP15H-4PH | 4.510,00 € | 0 ... 1.5kV | 0 ... 4A | 0 ... 6kW | 1V | 1mA | ≤0.05%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP15H-5-33PH | 5.440,00 € | 0 ... 1.5kV | 0 ... 5.33A | 0 ... 8kW | 1V | 1mA | ≤0.05%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP100H-006PH | 2.640,00 € | 800V ... 10kV | 0 ... 0.06A | 0 ... 600W | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP100H-012PH | 2.920,00 € | 800V ... 10kV | 0 ... 0.12A | 0 ... 1.2kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP100H-024PH | 3.330,00 € | 800V ... 10kV | 0 ... 0.24A | 0 ... 2.4kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP100H-03PH | 3.560,00 € | 800V ... 10kV | 0 ... 0.3A | 0 ... 3kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP100H-04PH | 3.980,00 € | 800V ... 10kV | 0 ... 0.4A | 0 ... 4kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP120H-005PH | 2.800,00 € | 1kV ... 12kV | 0 ... 0.05A | 0 ... 600W | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP120H-012PH | 3.050,00 € | 1kV ... 12kV | 0 ... 0.12A | 0 ... 1.2kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP10H-06PH | 1.990,00 € | 0 ... 1kV | 0 ... 0.6A | 0 ... 600W | 1V | 0.1mA | ≤0.05%FS | ≤0.05%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP10H-1-2PH | 2.450,00 € | 0 ... 1kV | 0 ... 1.2A | 0 ... 1.2kW | 1V | 1mA | ≤0.05%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP10H-2-4PH | 2.870,00 € | 0 ... 1kV | 0 ... 2.4A | 0 ... 2.4kW | 1V | 1mA | ≤0.05%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP10H-3PH | 3.100,00 € | 0 ... 1kV | 0 ... 3A | 0 ... 3kW | 1V | 1mA | ≤0.05%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP10H-4PH | 3.520,00 € | 0 ... 1kV | 0 ... 4A | 0 ... 4kW | 1V | 1mA | ≤0.05%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP10H-5PH | 3.910,00 € | 0 ... 1kV | 0 ... 5A | 0 ... 5kW | 1V | 1mA | ≤0.05%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP10H-6PH | 4.470,00 € | 0 ... 1kV | 0 ... 6A | 0 ... 6kW | 1V | 1mA | ≤0.05%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP10H-8PH | 5.380,00 € | 0 ... 1kV | 0 ... 8A | 0 ... 8kW | 1V | 1mA | ≤0.05%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP20H-03PH | 2.060,00 € | 0 ... 2kV | 0 ... 0.3A | 0 ... 600W | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP20H-06PH | 2.520,00 € | 0 ... 2kV | 0 ... 0.6A | 0 ... 1.2kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP20H-1-2PH | 2.960,00 € | 0 ... 2kV | 0 ... 1.2A | 0 ... 2.4kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP20H-1-5PH | 3.190,00 € | 0 ... 2kV | 0 ... 1.5A | 0 ... 3kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP20H-2-5PH | 4.000,00 € | 0 ... 2kV | 0 ... 2.5A | 0 ... 5kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP20H-2PH | 3.570,00 € | 0 ... 2kV | 0 ... 2A | 0 ... 4kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP20H-3PH | 4.650,00 € | 0 ... 2kV | 0 ... 3A | 0 ... 6kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP20H-4PH | 5.610,00 € | 0 ... 2kV | 0 ... 4A | 0 ... 8kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP30H-02PH | 2.130,00 € | 200V ... 3kV | 0 ... 0.2A | 0 ... 600W | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP30H-04PH | 2.610,00 € | 200V ... 3kV | 0 ... 0.4A | 0 ... 1.2kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP30H-08PH | 3.060,00 € | 200V ... 3kV | 0 ... 0.8A | 0 ... 2.4kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP30H-1-3PH | 3.660,00 € | 200V ... 3kV | 0 ... 1.3A | 0 ... 4kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP30H-1-6PH | 4.000,00 € | 200V ... 3kV | 0 ... 1.6A | 0 ... 5kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP30H-1PH | 3.330,00 € | 200V ... 3kV | 0 ... 1A | 0 ... 3kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP30H-2-66PH | 5.650,00 € | 200V ... 3kV | 0 ... 2.66A | 0 ... 8kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP30H-2PH | 4.740,00 € | 200V ... 3kV | 0 ... 2A | 0 ... 6kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP40H-015PH | 2.510,00 € | 200V ... 4kV | 0 ... 0.15A | 0 ... 600W | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP40H-03PH | 2.750,00 € | 200V ... 4kV | 0 ... 0.3A | 0 ... 1.2kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP40H-06PH | 3.200,00 € | 200V ... 4kV | 0 ... 0.6A | 0 ... 2.4kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP40H-075PH | 3.420,00 € | 200V ... 4kV | 0 ... 0.75A | 0 ... 3kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP40H-1-25PH | 4.100,00 € | 200V ... 4kV | 0 ... 1.25A | 0 ... 5kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP40H-1-5PH | 4.790,00 € | 200V ... 4kV | 0 ... 1.5A | 0 ... 6kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP40H-1PH | 3.710,00 € | 200V ... 4kV | 0 ... 1A | 0 ... 4kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP40H-2PH | 5.700,00 € | 200V ... 4kV | 0 ... 2A | 0 ... 8kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP50H-012PH | 2.510,00 € | 300V ... 5kV | 0 ... 0.12A | 0 ... 600W | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP50H-024PH | 2.750,00 € | 300V ... 5kV | 0 ... 0.24A | 0 ... 1.2kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP50H-048PH | 3.200,00 € | 300V ... 5kV | 0 ... 0.48A | 0 ... 2.4kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP50H-06PH | 3.420,00 € | 300V ... 5kV | 0 ... 0.6A | 0 ... 3kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP50H-08PH | 3.710,00 € | 300V ... 5kV | 0 ... 0.8A | 0 ... 4kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP50H-1-2PH | 4.810,00 € | 300V ... 5kV | 0 ... 1.2A | 0 ... 6kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP50H-1-6PH | 5.750,00 € | 300V ... 5kV | 0 ... 1.5A | 0 ... 8kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP50H-1PH | 4.100,00 € | 300V ... 5kV | 0 ... 1A | 0 ... 5kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP60H-01PH | 2.510,00 € | 500V ... 6kV | 0 ... 0.1A | 0 ... 600W | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP60H-02PH | 2.750,00 € | 500V ... 6kV | 0 ... 0.2A | 0 ... 1.2kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP60H-04PH | 3.200,00 € | 500V ... 6kV | 0 ... 0.4A | 0 ... 2.4kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP60H-05PH | 3.420,00 € | 500V ... 6kV | 0 ... 0.5A | 0 ... 3kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP60H-066PH | 3.850,00 € | 500V ... 6kV | 0 ... 0.66A | 0 ... 4kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP60H-083PH | 4.210,00 € | 500V ... 6kV | 0 ... 0.83A | 0 ... 5kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP60H-1-33PH | 5.750,00 € | 500V ... 6kV | 0 ... 1.33A | 0 ... 8kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP60H-1PH | 4.810,00 € | 500V ... 6kV | 0 ... 1A | 0 ... 6kW | 1V | 1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP80H-0075PH | 2.640,00 € | 500V ... 8kV | 0 ... 0.075A | 0 ... 600W | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP80H-015PH | 2.920,00 € | 500V ... 8kV | 0 ... 0.15A | 0 ... 1.2kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP80H-037PH | 3.560,00 € | 500V ... 8kV | 0 ... 0.37A | 0 ... 3kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP80H-03PH | 3.330,00 € | 500V ... 8kV | 0 ... 0.3A | 0 ... 2.4kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB | |
| DP80H-05PH | 3.980,00 € | 500V ... 8kV | 0 ... 0.5A | 0 ... 4kW | 1V | 0.1mA | ≤0.1%FS | ≤0.1%FS | ≤0.5% + 2 LSB | ≤0.5% + 2 LSB | ≤0.1% + 2 LSB | ≤0.1% + 2 LSB |